Demo Mode - GE Profile PTWN8055MMS Technical Service Manual

4.5 doe cu. ft. stainless steel capacity washer
Hide thumbs Also See for Profile PTWN8055MMS:
Table of Contents

Advertisement

Main Wash
Main Wash
Liquid Detergent
Powder Detergent
Compartment
Compartment
Liquid Fabric
Softener
Compartment

Demo Mode

The washer control has demo mode that can be utilized to show user interface functionality. Once the user
presses the START button, the display shall rapidly count down (at approximately 100 times faster than
normal time), and illuminate the different cycle indicators on the 7-segment display.
To enter the demo mode:
With the power connected and in the idle state (all
LCD and LED indicators off):
1. Press and hold the SOIL and the SPIN buttons,
then press the POWER button.
2. Press the START button.
Insert
– 10 –
When using liquid detergent, make sure
the liquid detergent compartment and
insert are in place. For powdered
detergent, remove both the liquid
detergent compartment and insert.
Powdered detergent will not dispense
with the liquid detergent compartment
and insert in place.
To exit the demo mode:
1. Unplug the washer.
2. Wait 10-seconds.
3. Reconnect power to the washer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profile ptwn8050mww

Table of Contents