Brinkmann SMOKE’N GRILL Owner's Manual page 5

INSTR_810-5302-S.QXD 11/1/07
Lower support bracket
(V-clip) with notched side
Upper support bracket
with notched side
11:42 AM Page 5
STEP 1
facing up.
facing up.
STEP 2
a. Attach the three lower support brackets (V clips) to inside of smoker
b. Attach the three upper support brackets (single clips) to inside of
STEP 3
a. Attach wooden handle halves to metal brackets using 8-32 x w"
b. Attach two handle assemblies to side of smoker body using
Attach the three legs to smoker body using 10-24 x s" screws and
square nuts as illustrated.
body through the three 4" holes that are located about halfway down
on sides. Mount each bracket with notched side facing up using
10-24 x s" screws and square nuts. Tighten screws securely.
smoker body through the three 4" holes located near the top edge.
Mount each bracket with notched side facing up using 10-24 x s"
screws and square nuts. Tighten screws securely.
screws and nuts as illustrated.
10-24 x s" screws and square nuts as illustrated.
4