Enamelled Parts - CDA CD 307 User Operating Instructions Manual

ENAMELLED PARTS

All the enamelled parts must be cleaned with a sponge and soapy water only or other
non-abrasive products.
It is advisable to use a Chamois leather to dry all enamelled parts.
PAINTED AND ALUMINIUM PARTS
SILK-SCREEN PRINTED SURFACES
Claen using an appropriate neutral product.
Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra-
sion. You are advised to use a soft cloth and neutral soap.
WARNING
When correctly installed, your product meets all safety requirements laid
down for this type of product category. However special care should be
taken around the rear or the underneath of the appliance as these areas are
not designed or intended to be touched and may contain sharp or rough
edges, that may cause injury.
16