Makita PV7001C Instruction Manual page 9

Fit the wool bonnet completely over the
rubber pad and pull the string tight.
Tie a
bow knot and tuck the knot and any loose
strings between the wool bonnet and the
rubber pad.
To remove the wool bonnet, follow the installation urocedure in reverse.
Installing or removing abrasive disc
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the abrasive disc.
Mount the rubber pad onto the spindle.
screw the lock nut onto the spindle.
Fit the abrasive disc on over the pad and
, $ g l
Lock nut
Abrasive dis
Rubber pad
Hold
the spindle with the wrench
so
that
it
cannot revolve, then use the lock nut
Lock nut wrench
wrench and securely tighten clockwise.
To remove the lock nut, follow the installa-
tion procedure in reverse.
9