Makita PV7001C Instruction Manual page 8

Installing or removing sponge pad
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the sponge pad.
Remove all dirt or foreign matter from the
pad. Install the sponge pad to the pad. To
remove the pad, pull off it from the pad
slowly.
Installing
o r
removing wool bonnet
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the wool bonnet.
Mount the rubber pad onto the spindle.
Screw the lock nut onto the spindle.
I
I
To tighten the lock nut, hold the spindle
with the wrench so that it cannot revolve,
then use the lock nut wrench and securely
tighten clockwise.
I
I
Lock nut wrench
8