Makita PV7000C Instruction Manual
Electronic polisher
Hide thumbs
Also See for PV7000C:
- Instruction manual (56 pages) ,
- Technical information (15 pages) ,
- Instruction manual (49 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita PV7000C
Summary of Contents for Makita PV7000C
- Page 1 INSTRUCTION MANUAL Electronic Polisher PV7000C 004418 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model PV7000C Max capacities Sponge pad/ Wool bonnet 180 mm Rated speed (n)/No load speed (n 2,100 min Overall length 210 mm Net weight 2.1 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. - Page 3 moving parts. Damaged or entangled cords Power tool use and care increase the risk of electric shock. 18. Do not force the power tool. Use the correct When operating a power tool outdoors, use an power tool for your application. The correct extension cord suitable for outdoor use.
-
Page 4: Polisher Safety Warnings
GEB038-3 workpiece fragments. The eye protection must be capable of stopping flying debris generated by POLISHER SAFETY WARNINGS various operations. The dust mask or respirator Safety Warnings Common for Polishing Operation: must be capable of filtrating particles generated This power tool is intended to function as a by your operation. -
Page 5: Functional Description
c) Do not position your body in the area where FUNCTIONAL DESCRIPTION power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging. CAUTION: d) Use special care when working corners, Always be sure that the tool is switched off and •... - Page 6 CAUTION: ASSEMBLY If the tool is operated continuously at low speeds • for a long time, the motor will get overloaded, CAUTION: resulting in tool malfunction. Always be sure that the tool is switched off and The speed adjusting dial can be turned only as far •...
-
Page 7: Operation
To remove the wool bonnet, follow the installation Installing or removing sponge pad procedure in reverse. 1. Sponge pad OPERATION 2. Pad Polishing operation by sponge pad 004422 To install the sponge pad, first remove all dirt or foreign matter from the pad. Install the sponge pad to the pad. To remove the pad, pull it off from the pad slowly. -
Page 8: Replacing Carbon Brushes
If you need any assistance for more details regarding Replacing carbon brushes these accessories, ask your local Makita Service Center. Sponge pad (Hook & loop) • 1. Limit mark Backing pad 165 (Hook & loop) •... - Page 12 Makita Corporation www.makita.com 884356E7...