Makita PV7001C Instruction Manual page 7

High-Low speed setting button
The rotating speed can be changed instant-
ly while the tool is running.
Depress the "I" position for lowest speed
and depress the
"11"
position for
a
given
number setting.
The rotating speed cannot be changed
when the button is in "I" position, even if
you turn the speed adjusting dial. When
you turn the speed adjusting dial, always
be sure that the button is depressed in
"11"
position.
ASSEMBLY
Installing side grip (auxiliary handle)
81
cover
CAUTION:
@Always be sure that the tool is switched off and unplugged before installing or removing
Always be sure that the side grip is installed securely.
Install the cover, then screw the side grip on the tool securely. The side grip and the cover
can be installed on either side of the tool.
the side grip and the cover.
I I I .
Installing or removing pad
CAUTION:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the pad.
Hold the spindle with the wrench so that it
cannot revolve. Then screw the pad onto
the spindle all the way.
(The pad can be used to install the optional
sponge pad.)
To remove the pad, follow the installation
procedure in reverse.
7