DieHard Portable Power 1150 Operator's Manual
Diehard portable power 1150 battery charger operator's manual
Hide thumbs
Also See for Portable Power 1150:
- Operator's manual (12 pages) ,
- Owner's manual (11 pages) ,
- Operator's manual (15 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DieHard Portable Power 1150
Summary of Contents for DieHard Portable Power 1150
- Page 1 OPERATOR’S MANUAL Portable Power 1150 Model No. 28.71988 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. SAvE THESE INSTRUCTIONS. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. 00-99-001002/0710...
-
Page 3: Table Of Contents
1 year from the date of purchase, return it to any dieHard outlet in the United States for free replacement. This warranty does not include light bulbs, or the inflator hose and adapters, which are expendable parts. - Page 4 IMPORTANT: READ AND SAvE THIS SAfETY AND INSTRUCTION MANUAL. SAvE THESE INSTRUCTIONS – Charge the jump starter internal battery immediately after purchase, after every use and every 30 days. This manual will show you how to use your jump starter safely and effectively. Please read, understand and follow these instructions and precautions carefully, as this manual contains important safety and operating instructions.
-
Page 5: Important Safety Instructions
IMPORTANT SAfETY INSTRUCTIONS - SAvE THESE INSTRUCTIONS - This manual contains important safety and operating instructions RISK Of ELECTRIC SHOCK OR fIRE. Read the entire manual before using this product. Failure to do so could result in serious injury or death. Keep out of reach of children. -
Page 6: Personal Precautions
PERSONAL PRECAUTIONS RISK Of EXPLOSIvE gASES. A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK Of A SPARK NEAR THE BATTERY: Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance that you follow the instructions each time you use the jump starter. -
Page 7: Follow These Steps When Connecting To A Battery
fOLLOW THESE STEPS WHEN CONNECTINg TO A BATTERY A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK Of A SPARK NEAR THE BATTERY: NEgATIvE gROUNDED SYSTEM Attach the output cables to the battery and chassis as indicated below. Never allow the output clips to touch each other. -
Page 8: Grounding And Ac Power Cord Connections
gROUNDINg AND AC POWER CORD CONNECTIONS RISK Of ELECTRIC SHOCK OR fIRE. The jump starter charger is for use on a nominal 120-volt circuit. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. -
Page 9: Features
fEATURES Jump Start On/Off switch Inverter/Compressor switch digital display Plastic lens cover Two, light bulbs Two, 12v dC power outlets Two, 110v AC household power outlets. USB port Power Switch ( Light/display) Air compressor gauge Air compressor hose Air compressor accessory bag Air compressor ball inflation adapter Two, air compressor... -
Page 10: Operating Instructions
Charging the Internal Battery using the Included Wall Charger. To charge, plug the included wall charger into the charger port on the back of the jump starter. Plug the wall charger into a 120v AC electrical wall outlet. While the jump starter is charging, the battery’s percent of charge will be displayed. - Page 11 After the engine starts, disconnect the black clip (-) and then the red clip (+) in that order. Recharge the jump starter as soon as possible after use. Risk of Explosion. To prevent sparking, NEvER allow the clips to touch together or to contact the same piece of metal.
- Page 12 Turn the Jump Starter On/Off switch to the ON position. Turn the USB device on. Reverse these steps when finished using the USB port. Charge the jump starter as soon as possible after using the USB port. Using the Built-In Light Position the jump starter on a flat, stable surface near the intended work area.
- Page 13 Using the Inflator Risk of explosion. Read instructions of the product being inflated before using the inflator. Avoid over inflation, do not exceed the manufacturer’s recommended pressures. Do not leave the inflator unattended during use. Ensure that the battery clips are securely on the storage holders. Attach the corrugated hose with end adapter to the high-flow inflator port located near the inflator ON/OFF switch on the back of the jump starter.
- Page 14 dO NOT operate the jump starter if you, the jump starter, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury or death. do not place the jump starter on or near heating vents, radiators or other sources of heat.
-
Page 15: Maintenance Instructions
Fluorescent and High Intensity Lamps (with a Ballast); and Transformerless Battery Chargers. doing so, may cause the device to run warmer or overheat. 8.11 Powering a 120v AC Device To operate a 120v AC device: Ensure that the battery clips are securely on the storage holders. Open the protective cover of the AC power outlet on the front panel of the jump starter. -
Page 16: Moving And Storage Instructions
MOvINg AND STORAgE INSTRUCTIONS 10.1 Store the jump starter in an upright position. 10.2 Store inside, in a cool, dry place. 10.3 do not store the clips on the handle, clipped together, on or around metal, or clipped to cables. The clips on the jump starter are live and will produce arcing or sparking if they come in contact with each other. -
Page 17: Specifications
PROBLEM POSSIBLE CAUSE REASON/SOLUTION The jump starter won’t The 12v device is not Turn on the 12v device. power my 12v device. turned on. The jump starter battery is Check the battery charge not charged. status by pressing the button on the front of the jump starter.