Dial Select Step - Icom IC-R6 Instruction Manual

4
BASIC OPERATION

Dial select step

This receiver has a 1 MHz tuning step for quick frequency
setting. You can select 100 kHz, 1 MHz or 10 MHz steps, as
desired.
D Setting dial select step
q Push [V/M] to select the VFO mode.
w Hold down [SET](TS) for 1 second to enter the Set mode.
e Rotate [DIAL] to select the "D SEL" item.
• "D SEL" disappears after 1 second and "1M" (default) and "DS"
appear.
r While holding down [FUNC], rotate [DIAL] to select a
desired dial select step.
• 100 kHz, 1 MHz and 10 MHz can be selected.
t Push [SET](TS) to exit the Set mode.
17
[
[DIAL]
1 MHz step
10 MHz step
100 kHz step