Icom IC-R6 Instruction Manual page 15

y TUNING STEP • SET • DIAL EXCHANGE KEY
[TS] • [SET](TS) • [ ](TS)]
Push to enter tuning step selecting mode. (p. 9)
Hold down for 1 second to enter the Set mode. (p. 39)
While holding down [FUNC], push to exchange the
[DIAL] and [ ]/[ ] keys' functions. (p. 49)
u POWER KEY [ ]
Hold down for 1 second to turn the receiver power ON or
OFF.
i MODE • SCAN • TONE SCAN KEY
[MODE] • [SCAN](MODE) • [
Push to select the receive mode. (p. 12)
Hold down for 1 second to enter the scan type selec-
tion mode. (p. 26)
• Push again to start the scan.
While holding down [FUNC], push to start a tone scan.
(p. 38)
o VFO/MEMORY • MEMORY WRITE • SKIP KEY
[V/M] • [S.MW](V/M) • [
Toggles between the VFO or the memory mode. (p. 7)
Hold down for 1 second to enter memory edit condi-
tion. (p. 16)
During VFO mode operation, hold down [FUNC], then
push this key to select the programmed skip scan set-
ting ON or OFF.
During memory mode operation, hold down [FUNC],
then push this key to select the scan skip condition for
the selected channel. (p. 30)
](MODE)
](V/M)
PANEL DESCRIPTION
!0 EXTERNAL DC-IN CONNECTOR [DC4.5V] (p. 6)
Connects an AC adapter or an optional cigarette lighter
cable for both charging the installed re-chargeable battery
and operating. Connectable voltage is from 4.5 V DC to
6.3 V DC.
!1 EXTERNAL SPEAKER CONNECTOR [SP]
Connect an optional earphone or headphones.
The internal speaker will not function when any external
equipment is connected. (See page 65 for a list of avail-
able options.)
!2 CONTROL DIAL [DIAL]*
Rotate to select the operating frequency.* (p. 9)
While scanning, changes the scanning direction.
(p. 26)
While holding down [SQL], sets the squelch level.
(p. 12)
While holding down [FUNC], sets the operating fre-
quency in 100 kHz, 1 MHz or 10 MHz in the VFO
mode. (p. 9)
While holding down [FUNC], selects the memory chan-
nel in 10 channels steps in the memory mode. (p. 10)
While holding down [BAND], selects the operating
band in the VFO mode. (p. 7)
*The functions of [DIAL] and [ ]/[ ] can be exchanged. See page
49 for details.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2