RIDGID R4090 Operator's Manual page 18

ASSEMBLY
INSTALLING THE READY RACK™ TILE
CARRIER
See Figure 18.
Snap the carrier over the upper tube on the leg stand. The
carrier provides a storage area for cut tiles while the holes
in the bottom allow water to drain away from the tiles.
CONNECTING THE GARDEN HOSE
See Figure 19
The water supply must come from a fresh water main. NEVER
turn the water supply on high (fully opened).
The water supply valve provides a convenient on/off for
adjusting the water flow onto the cutting wheel. When used
properly, the water supply valve adjusts the water flow to
the perfect, optimal rate.
 Uncoil the garden hose.
 With the water main faucet turned completely off, attach
the end of the garden hose to the water supply valve.
Tighten by hand.
riGht
uPPer
tuBe
readY racK™
tile
carrier
Garden
connector
hose
18 — English
Garden
hose
Fig. 18
Fig. 19