Panel Unit - Epson Stylus Photo PX650 Service Manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635

4.2.6 Panel Unit

C H E C K
The disassembly/reassembly procedures for Epson Stylus Photo
P O I N T
PX660/PX660 Premium/Artisan 635 differ from those for Epson
Stylus Photo PX650/TX650/TX659. See
(p.148) for the procedures.
 Parts/Components need to be removed in advance
Upper Housing
 Removal procedure
C A U T I O N
Be careful not to disconnect the Panel FFC from the connector on
the Panel Board.
1. Disconnect the Panel FFC (CN24) from the connector on the Main Board and peel
off the Panel FFC from the M/B Cover.
Panel FFC
M/B Cover
Main Board
Figure 4-22. Removing the Panel Unit (1)
DISASSEMBLY AND ASSEMBLY
"8.2.2.2 Panel Unit"
Panel Unit
C A U T I O N Be careful not to disconnect.
CN 24
Double-sided tape
Removal of Exterior Parts
2. Remove the screws (x2) that secure the Panel Gear.
3. Remove the screws (x1 each) that secure the Panel Hinges (x2), and remove the
Panel Unit from the M/B Cover.
Front upper
M/B Cover
Left
Panel Hinge
M/B Cover
C.B.P. 3x10 (6±1 Kgfcm)
Figure 4-23. Removing the Panel Unit (2)
Revision C
Panel Gear
Panel Unit
Right
Panel Hinge
M/B Cover
Positioning hole and dowel
Confidential
72