Linear Scale - Epson Stylus Photo PX650 Service Manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635

4.4.2 Linear Scale


C A U T I O N
When you hold the Linear Scale, hold its ends or two points of
the top and bottom surfaces with your hands; do not touch the
reading surface.

Take care that the reading surface is not soiled or scratched.
Especially when putting the Linear Scale through the CR
Encoder during reassembly work, take great care that grease of
the CR Guide Shafts does not adhere to the reading surface.
About 25mm
Hold here
Hold here
C H E C K
If you need to move the Carriage Unit, unlock the Carriage in
P O I N T
advance.
(See 4.1.5 How to Unlock the Carriage
 Parts/Components need to be removed in advance
Upper Housing / Scanner Unit / Panel Unit / M/B Cover / Waste Ink Tray Assy /
Middle Housing
 Removal procedure
1. Remove the spring from the left frame of the printer.
2. Release the Linear Scale from the hook at the right frame of the printer.
3. Pull out the Linear Scale from the CR Encoder of the CR Unit.
4. Turn the Linear Scale upward by 90 degrees and release it from the left hook.
DISASSEMBLY AND ASSEMBLY
About 45mm
Hold here
Hold here
CR_Scale02.eps
(p.62).)
Disassembling the Printer Mechanism
Step 1. Remove the spring
Step 4. Turn it by 90 degrees and release it
Figure 4-57. Removing the Linear Scale
Install the Linear Scale with the cutting portion upward.
Revision C
Step 2. Release it from the hook
CR Unit
Step 3. Pull it out from CR Encoder
Cutting Portion
Confidential
87