User Set Mode; Scrambler Function; Stun Function - Icom IC-F3161DT Instruction Manual

■ User set mode

The User Set mode allows you to set seldom-changed set-
tings. If the transceiver has [User Set Mode] assigned to it,
you can "customize" the transceiver operation to suit your
preferences and operating style.
Entering the user set mode:
q Push and hold [User Set Mode] to enter the User Set
mode.
w Push [User Set Mode] several times to select the appro-
priate item. Then push [CH Up] or [CH Down] to set the
desired level/condition.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, LCD contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal
Moni, Lone Worker and System Info.
* Appears only when the external VOX unit is connected.
e Push and hold [User Set Mode] again to exit the User Set
mode.

■ Scrambler function

The voice scrambler function provides private communication
between stations. All versions have a built-in frequency inver-
sion type scrambler.
➥ Push [Scrambler] to toggle the scrambler function ON or
OFF.
• " " (Scrambler indicator) appears when the function is ON.

■ Stun function

When the specified ID, set as a stun ID or kill ID, is received,
the stun function is activated.
When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 11) or receiving a specified
ID, set as a revive ID, is necessary to operate the transceiver
again in this case.
When the kill ID is received, the transceiver switches to the
cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case.
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16