Handle; Shroud, Grille Fan; Icemaker Assembly; Aluminum Short Handle Model - LG SxS Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE

2. HANDLE

1) Aluminum short handle Model

(1) Grasp the handle by both hands and hold it upward.

3. SHROUD, GRILLE FAN

1) Loosen screws after disconnecting a cap screw of a grill
fan(U) with a blade screwdriver.
2) Disassembly of a grille fan(U) : Pull forward after
opening hook at part with a blade screwdriver.
3) Disconnect housing and disassembly of shroud F(U)
: holding upper part and pull forward
4) Disassembly of a grille fan(L) : Hold upper part of a grill
fan(L) and pull forward carefully
5) Check foam PU sticking conditions around a shroud,
F(U) and F(L) during assembling. If damaged, torn or
badly sticked, assemble with a new one after sealing
well.

4. ICEMAKER ASSEMBLY

1. How to disassemble :
(1) Remove the cover and ice bucket from the freezer door.
(2) Disassemble the Motor, AC and icemaker
Loosen four Lift up the Motor,
screws. AC assembly
• Caution : When pulling out the Motor AC, do not damage
the water injector.
(3) Disconnect housing and loose screws
Disconnect the Loosen screw of
housing guide water
- 115 -
Pull out the Motor,
AC with swing like
this figure.
Loosen screws of
icemaker and pull
out the icemaker.