Removing The Handle - LG GM29BP Owner's Manual

Accessories
*1 This feature is only available on some models.
*1
Spanner A
a
*1
Spanner B
b
*1
C-Clip (Snap Ring)
c
d Water Filter
*1
e Water Tube
*1
f Tube Connector
g Tube Connector and Valve

Removing the Handle

When moving the appliance through a narrow
opening, removing the doors is preferred.
The appearance of the handles may vary from what
is shown.
These instructions are for models which ship with
the handles assembled. For models shipped with
the handles disassembled, follow the instructions
included in the handle package.
• Tools Needed
- Units shipped with assembled handles:
2.38 mm (3/32 in.), 3.18 mm (1/8 in.), 6.35 mm
(1/4 in.) Allen wrenches
- Units shipped with disassembled handles:
2.38 mm (3/32 in.), 6.35 mm (1/4 in.) Allen
wrenches
CAUTION
• When removing or refitting the appliance
handle, grasp the handle firmly to avoid
dropping it.
*1
• Make sure that there is not a gap between the
door and handle after assembling the handle.
Removing the Fridge Handle
1
Loosen the set screws
in.) Allen wrench and remove the handle.
2
Loosen the mounting fasteners
to the refrigerator door and handle using a
6.35 mm (1/4 in.) Allen wrench, and remove the
mounting fasteners.
Removing the Freezer Drawer
Handle
1
Loosen the set screws
side of the handle with a 3.18 mm (1/8 in.) Allen
wrench and remove the handle.
• For models shipped with the handles
disassembled, use a 2.38 mm (3/32 in.) Allen
wrench.
INSTALLATION
with a 2.38 mm (3/32
a
that connect
b
located on the lower
a
13