How To Disassemble And Assemble; Door - LG SxS Service Manual

Refrigerator
Hide thumbs Also See for SxS:
Table of Contents

Advertisement

HOW TO DISASSEMBLE AND ASSEMBLE

1. DOOR

1) Remove lower cover and remove clip then
disconnect water supply tube in the lower part
of freezer door.
• Pull a water supply tube
to disconnect water supply tube as shown below.
2) Remove a freezer door.
(1) Loosen hinge cover screw of freezer door and remove
cover.
Disconnect all connecting lines except earthing cord.
Cover, Hinge
(2) Turn hinge lever in arrow A direction until it is
loosened and take it out in arrow B direction.
Lever, Hinge
A
B
Note : • When disconnecting refrigerator door, turn hinge
lever counterclockwise.
• If hinge lever or bracket hinge pin is deformed
during assembling freezer and refrigerator doors,
fix two screws (Tap Tite Screw, M6: Hinge, L fixing
screw) in the hole of upper hinge.
forward while pressing
1
2
Connecting
Line
2
Earthing
Cord
(3) Disconnect upper hinge
by grasping the front part of upper hinge and lifting up
(Hinge Assembly, U) in arrow direction A and pull
forward in arrow B direction. Be careful as the door
may be fallen down.
part
A
(4) Lift up the freezer door
disconnect the door from the lower hinge
a door forward.
1
Note : • Lift up a freezer door until a water supply tube is
fully taken out.
(5) Assembly is the reverse order of disassembly
- 114 -
from a hinge supporter
1
2
A
in arrow direction and
2
B
. Don't pull

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxs gw-p227Sxs gw-l227Sxs gw-c227Sxs gw-b227

Table of Contents