MICROBOARDS TECHNOLOGY, LLC
Setting Printer Alignment
Alignment
The GX-2 Disc Publisher system has been aligned at the factory. The factory alignment values are on
a label on the back of the GX-2 Disc Publisher. Follow these steps to enter the factory values:
•
Click on the Start Button on your
Windows computer.
•
Select Settings and then
Printers.
•
Right click on the Microboards
GX Series icon.
•
Select Printing Preferences.
•
Select the Utility Tab.
•
Click on the .1mm selection in
the Resolution box.
•
Enter the values listed with the
GX-2 Disc Publisher into the Top
and Left Side boxes.
•
Click the Apply button.
•
Click the OK button.
Print Test Disc
To confirm the computer is communicating with the GX-2 Disc Publisher, print a Test Disc. This can
be done with one of the inkjet printable CD's included with your GX-2 Disc Publisher, or an inkjet
compatible disc you may already have. To print the Test Disc:
•
Place the inkjet printable
media into the input hopper.
•
Launch the Zulu2 program
(see page 17).
•
Once Zulu2 is running, select
the Robotic menu
•
Select Utilities
•
Select Print Test Disc.
•
A disc will be dropped onto
the belts and then printed.
•
Once printing is complete,
the disc will be ejected into
the output hopper.
•
If the alignment is OK,
proceed with your printing
project.
•
If not, go to Print Alignment
Disc.
13
GX-2 DISC PUBLISHER