ATEN Master View CS-9134 User Manual page 15

4. Repeat steps 1 - 3 for any other Third Stage units you wish to connect.
5. For each Third Stage unit: Plug the power adapter into an AC source; plug
the power adapter cable into the Master View' s Power Jack.
6. For each Second Stage unit: Plug the power adapter into an AC source; plug
the power adapter cable into the Master View' s Power Jack.
7. For the First Stage Master View unit: Plug the power adapter into an AC
source; plug the power adapter cable into the Master View' s Power Jack.
8. Turn on the power to all the computers.
Note: The Power On sequence requires that all Third Stage units be powered
on first. After they are all on, the Second Stage units must be powered
on next. After all the Second Stage units are on, the First Stage unit must
be powered on. Only after all the Master Views have been powered on in
this sequence, can the computers be powered on.
CS-9134 / CS-9138 User Manual 11
2001-05-21