Punching Holes In Copies (Punch Settings) - Konica Minolta bizhub c203 User Manual

Copy Operations
3.12.5

Punching holes in copies (Punch settings)

!
Detail
In order for holes to be punched in the copies on the finisher FS-609, all of the following conditions must
be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the original is positioned. If an Original
Direction setting is not selected, holes may not be punched in the copies as desired.
Note
The Punch settings are available only if the punch kit is installed on the optional finisher.
Type of punch kit
Punch kit PK-510
Punch kit PK-501
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Under "Punch", touch [4-Hole].
bizhub C353/C253/C203 (FE2)
Paper weight
2 2
60 g/m to 256 g/m
2 2
60 g/m to 209 g/m
Paper size
A3 w, A4 v, B5 w
A3 w, A4 v
3
3-63