Pushing The Wheelchair In Freewheel Mode; Disengaging Motors - Invacare TDX SP User Manual

6

Pushing the wheelchair in freewheel mode

The motors of the wheelchair are equipped with automatic brakes, preventing that the wheelchair
starts rolling out of control when the joystick box is switched off. When pushing the wheelchair
manually whilst freewheeling, the magnetic brakes must be disengaged.
NOTE:
Pushing the wheelchair by hand may require more physical force than expected (more than
100 N). The necessary force nevertheless complies with the requirements of ISO 7176-14:2008.
6.1

Disengaging motors

Danger of the vehicle running away!
• When the motors are disengaged (for push operation whilst freewheeling), the
electromagnetic motor brakes are deactivated! When the vehicle is parked, the levers for
engaging and disengaging the motors must without fail be locked firmly into the "DRIVE"
position (electromagnetic motor brakes activated)!
NOTE:
The motors may only be disengaged by an attendant, not by the user!
This ensures that the motors are only disengaged if an attendant is available to secure the
wheelchair and prevent unintended rolling.
The lever for disengaging the motors is located behind the motors.
41