Safety Information On Maintenance Work And Alterations To The Wheelchair - Invacare TDX SP User Manual

2.5 Safety information on maintenance work and alterations to the
wheelchair
WARNING: Danger of injuries and damage to the wheelchair, in case the suspension is
adjusted without the immobilisation mechanism of the front anti-tippers being re-
adjusted!
• When the hardness of the suspension is adjusted, the immobilisation mechanism of the front
anti-tippers must without fail be checked and, if necessary, also re-adjusted!
Important information about maintenance work tools!
Some maintenance work which is described in this manual and can be carried out by the user
without problems require the correct tools for proper work. If you do not have the correct tool
available we do not recommend that you try to carry out the relevant work. In this case, we
urgently recommend that you contact an authorised specialist workshop.
CE marking of the wheelchair
The conformity assessment/ CE marking was carried out in accordance with Directive 93/42
EEC / MPG (Medical Devices Act) and only applies to the complete product.
The CE marking is invalidated if components or accessories are replaced or added that have not
been approved for this product by Invacare.
In this case, the company that adds or replaces the components or accessories is responsible
for the conformity assessment/ CE marking or for registering the wheelchair as a special design
and for the relevant documentation.
28