Basic Setup: Installing Mydvr On Pc - Swann Digital Video Recorder Manual

English
Your DVR comes with powerful remote access and interface
software, called MyDVR. You can setup and configure almost
all aspects of the DVR from the MyDVR interface.
The MyDVR software will allow you to:
• view images from your DVR in real-time,
• playback recorded footage,
• copy footage to your local PC and
• adjust settings and configure the DVR.
In fact, the MyDVR software is so powerful, you don't even
need to connect a monitor to the DVR if there's a computer on
the local network that you're running MyDVR on.
For quick and easy configuration of the DVR's settings,
recording quality and schedule, we suggest using the
remote interface in MyDVR.
How to install MyDVR:
• Insert the included CD into your computer.
Locate the file called MyDVR Windows vxxxx.exe (the x
•
represents numbers showing the version) and run this file.
You may be asked by UAC (User Account Control) to allow
MyDVR to "make changes" to your system. Select Allow or
Continue.
• You'll see an installation wizard. Simply follow the prompts
to install the software.
• Once the MyDVR software has been installed, it should
automatically detect your DVR on your network.
Minimum PC Requirements:
2.0GHz or faster CPU
1GB or more RAM
10/100Mbps Network
Internet connection
1024x768 resolution
Supported Operating Systems
Microsoft Windows XP, Microsoft Windows Vista, Microsoft
Windows 7
NOTE: Windows XP, Windows Vista and Windows 7
are registered trademarks of Microsoft Corporation.
Got a Mac?
Check out
www.swann.com/mydvrmac
for the latest Mac-based remote
access software.
16

Basic Setup: Installing MyDVR on PC

(Dual-core recommended)
(2GB recommended)
(1000Mbps recommended)
(512kbps+ recommended)
(1280x720 recommended)