Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1
(See Diagram 1)
A.) Plug four 2 ¾" x 2" End Cap (#21) onto the Left and Right Upright Beams (#1) & (#2).
B.) Connect the Left and Right Upright Beams with a Cross Brace (#3) in the mid-span. Secure
each end of the Cross Brace with two M10 x 2 ¾" Carriage Bolts (#42), one 4 ¾" x 2 ¾"
Bracket (#17), two Ø ¾" Washers (#39), and two M10 Aircraft Nuts (#50).
C.) Place the Backrest Adjustment Bar (#8) onto the selected slot on the Upright Beams to obtain
desired backrest incline.
D.) Insert the two Crutches (#7) into the two Upright Beams. Use the Lock Knob (#26) to lock the
Crutch in desired position.
DIAGRAM 1
Advertisement
Table of Contents
