Ptp 54500 Fcc Antenna Restrictions; Table 40 - Allowed Antennas For Deployment In Usa/Canada - 5.4 Ghz - Motorola PTP 500 Series User Manual

16.2.8 PTP 54500 FCC Antenna Restrictions

In FCC regions, external antennas from the list in Table 40 can be used with the
Connectorized version of the PTP 54500. These are approved by the FCC for use with the
product and are constrained by the following limit for Single/Dual Polarization Parabolic Dish
Antennas: up to 34.6 dBi per polarization or antenna.
However, the Maximum Transmit Power must be reduced to avoid exceeding the EIRP limits.
In FCC regions when using external antennas, cable loss between the connectorized version
of the PTP 500 Series Bridge and the antenna ports must not be less than 1.2 dB.
CAUTION
Antennas not included in this table, or those having a gain greater than the specified
maximum, are strictly prohibited for use with the PTP 54500. The required antenna
impedance is 50 ohms.
Table 40 - Allowed Antennas for Deployment in USA/Canada – 5.4 GHz
Manufacturer
Andrew
Andrew
Andrew
Andrew
Andrew
Andrew
Gabriel
Gabriel
Gabriel
Gabriel
Antenna Type
Andrew 2-foot Parabolic, P2F-52 (29.4 dBi)
Andrew 2-foot Dual-Pol Parabolic, PX2F-52
(29.4 dBi)
Andrew 3-foot Parabolic, P3F-52 (33.4 dBi)
Andrew 3-foot Dual-Pol Parabolic, PX3F-52
(33.4 dBi)
Andrew 4-foot Parabolic, P4F-52 (34.9 dBi)
Andrew 4-foot Dual-Pol Parabolic, PX4F-52
(34.9 dBi)
Gabriel 2-foot High Performance QuickFire
Parabolic, HQF2-52-N
Gabriel 4-foot High Performance QuickFire
Parabolic, HQF4-52-N
Gabriel 2-foot High Performance Dual
QuickFire Parabolic, HQFD2-52-N
Gabriel 4-foot High Performance Dual
QuickFire Parabolic, HQFD4-52-N
233
16 PTP 500 Reference Information
Gain Parabolic
(dBi) Dish
29.4 Y
29.4 Y
33.4 Y
33.4 Y
34.9 Y
34.9 Y
28.2 Y
34.4 Y
28.1 Y
34.3 Y