Advertisement
FCC Part 68 and Telephone Company Procedures and Requirements for DSU
FCC Part 68 and Telephone Company Procedures and
Requirements for DSU
Before You Begin
How to Order
Connections
Troubleshooting
Your Connection
Customer-Provided
Telephone
Equipment
1-10
Before the Motorola Vanguard 100 can be connected to the network, you must:
• Provide the local telephone company with the equipment's registration
number
• Order the proper connections
To order the proper connections, provide the telephone company with the following
information:
• Interface type
• Required USOC jack connector number
• Service code
• Facility interface codes
Interface Type
56-kbps digital interface
If any of your equipment is not operating correctly, immediately remove it from the
telephone line before damaging the network. If the telephone company is aware of
the problem, they may temporarily disconnect your service. Whenever possible, the
telephone company notifies you in advance of the disconnection.
If advance notice is not feasible, you are notified as soon as possible. Once notified,
you can correct the problem. If necessary, it is your right to file a complaint with the
FCC.
FCC regulations and telephone company procedures prohibit connection of
customer-provided equipment to telephone company-provided coin service (central
office-implemented systems). Connection to party lines is subject to state tariffs.
Occasionally, the telephone company may make changes in their equipment,
operations, or procedures. If these changes can affect your equipment or service, the
telephone company provides written notice so that you can make the necessary
changes to maintain uninterrupted service.
Contact your telephone company if you have any questions about your telephone
line.
In some circumstances, the telephone company may ask you for information about
the equipment that is connected to the telephone line. Within the United States (at the
request of the telephone company), you should provide your equipment's FCC
registration number. This number is located on the unit's label.
USOC Jack
Service
Connector
Code
RJ48S
6.0F
Facility Interface
Code
04DU5-56
About the Vanguard 100
Advertisement
