Enabling, Disabling An Alarm - Furuno FCV-30 Operator's Manual

1.18.2

Enabling, disabling an alarm

1. Click Settings.
2. Click Alarm.
Alarm dialog box
3. Check the box in Bottom alarm, Fish alarm, Temp alarm or V-temp alarm as appropriate.
4. For the Fish alarm, choose alarm type with the radio buttons Fish or Bottom fish.
For the Temp alarm or V-temp alarm, choose alarm type with the radio buttons Out of
range or Within range.
5. Click ◄ or ► in the Alarm depth box (for bottom alarm or fish alarm) or Temp limit box
(for temperature alarm or v-temp alarm) to set alarm depth (or temperature limit).
6. Click ◄ or ► in the Alarm zone box to set the width of the alarm from the starting point.
7. Click the OK button.
00:00:28
34 42.616' N
135 19.740' E
Alarm range
50
The alarm marker appears at the right edge of the display, and the color is green for the
bottom fish alarm and orange for the fish alarm.
To disable an alarm, remove the check mark from the box at step 3 in the above procedure.
0
20
Starting point
Alarm marker
Green: Bottom alarm
40
Orange: Fish alarm, Bottom fish alarm
Purple: Temperature alarm
(Temperature graph turned on
60
from DIsplay item dialog box)
80
Alarm marker
1. OPERATIONAL OVERVIEW
1-31