Turning The Power On/Off - Furuno FCV-30 Operator's Manual

1.3

Turning the Power On/Off

Turning on the power
1. Turn on the monitor.
2. Open the power switch cover on the Control Unit and push the
comes on, Windows starts up, the FCV30 application launches and then the last-used
display appears.
Note that the Windows Help feature is not available with this equipment.
Turning off the power
There are two methods to turn off the power.
a) Press the switch. Do not press the switch more than four seconds; last-used
settings will not be memorized.
b) Click the close button (
quit.
Confirmation
Are you sure to quit?
[Yes]-> Shutdown
[No ]-> Cancel
Yes
Shutdown confirmation window
Note: Power is automatically turned off anytime the processor unit is disconnected from the
control unit.
). The following window appears. Then, click the Yes button to
No
1. OPERATIONAL OVERVIEW
switch. The power
1-7