Part 10 Removal Procedure; Removal Procedure Of Indoor Unit - Toyotomi GAG-A128GVR Service Manual

Removal Procedure
10. Removal Procedure

10.1 Removal Procedure of Indoor Unit

1. External features
2. Removing air filters
Pull protrusions on left
1
and right sides of panel
with fingers and open
front grille all the way.
Lift center section of air
2
filter and disengage
hooks.
Remove air filter by
3
pulling forward.
Warning Be sure to wait 10 minutes or more after turning
off all power supplies before disassembling work.
Air filter
Hooks
If ON/OFF button is kept pushing
for 5 seconds, aforced cooling op-
eration willbe carried out for
approx. 15minutes.
Left and right filters are
interchangeable.
To re-install, insert air filter
along the guide.
53