CLEANING THE OVEN DOOR
positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
• O pen the door fully to gain access to the hinges.
• Push down the hinge locking tab on both hinges.
Locking tab up - normal
position
• G ently close the door until it stops in the partially open
position on the locking tab.
NOTE: The door can not fully close with the locking tab
in this down position.
removing the top door trim
• Push in the 2 tabs on either side of the trim.
• Lift the trim away from the door.
Locking tab down - for
cleaning
removing the glass panes
• R emove the inner glass and middle glass from
the door.
• C lean the glass using detergent and warm water.
Wipe clean and dry thoroughly.
• T he outside glass can not be removed from the
door and hence can be cleaned in-situ.
middle Glass
reassembling the glass panes & and top door trim
• R eplace the middle glass back to the door first.
The middle glass is a clear pane and orientation of
the glass is not important.
• R eplace the inner glass next ensuring the side that
is painted is facing away from the oven cavity.
• R eplace the top door trim ensuring the 2 side tabs
have clipped into the column.
• P ull the hinge locking tabs back up and close
the door.
Inner Glass
Outside_
35