Electrolux EVE916BA User Manual page 25

USING THE INDUCTION HOB
power management
Power management divides the power between the
front and rear zones for each of the 3 modules. See
illustration below:
This allows either the front or rear zone to draw power
from the other, if maximum power is required.
Chef function
The Chef function
a predetermined heat setting. On the first use, the left
pair of zones is set to
and the right pair is set to
This allows you to move your pots quickly onto a heat
setting of either a high, medium or low intensity.
• D uring the first 9 minutes, if the cooking zones
are empty, the display symbol
• A fter 9 minutes, if there are still cooking zones
empty, an acoustic signal will sound and the
heat setting on these zones will revert to
• T o reactivate a pair of zones that are at ,
touch the Chef function sensor
• T o deactivate the Chef function on each of the
zones, touch the
• T he heat setting of each of the 3 pairs of
zones can be changed by touching either heat
setting sensor. This altered heat setting will be
remembered the next time the chef function
is used.
The timer
The Count Down timer
Use the Count Down timer to set how long you want a
cooking zone to operate for.
The selection of the Timer function is only
possible if the zone heat setting has been set.
• T o select the cooking zone: touch the sensor
again and again until the correct zone
indicator is displayed.
• W hen this function is activated, the
will come on. Immediately, touch the
to set the time (00 - 99 minutes). When the
timer indicator of the cooking zone starts to
flash more slowly the time will begin to
count down.
• T o see the remaining time select the cooking
zone with the
the remaining time.
will activate all 6 cooking zones to
, the middle pair is set to
.
will appear.
again.
sensor.
display
sensor. The display will show
• T o change the Count Down Timer: select the
cooking zone with the
• T o deactivate the Count Down Time select the
cooking zone with the
the time counts down to 00. The timer indicator will
go out.
When the timer countdown comes to an end, the cooking
zone will deactivate, the 00 will flash and a beep sound
will occur for 20 seconds.
The beep sound and flashing can be deactivated
immediately by touching the
,
.
sensor
sensor and touch
or .
sensor and touch
sensor.
25
until