Battery Installation - Power Wheels H4435 Owner's Manual With Assembly Instructions

IMPORTANT! Use only a Power Wheels
connector and built-in thermal fuse. Use of any other battery will
damage your vehicle. Make sure that you charge the battery for at
least 18 hours using the enclosed Power Wheels
charger before operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle. Never
charge the battery longer than 30 hours. Failure to follow these
instructions may damage your battery and will void your warranty.
1
• Using a slotted screwdriver, turn each lock fastener
unlocked position.
• Lift the hood to access the battery compartment.
2
• Slide the battery retainer open.
• Place the battery in the battery compartment and release the
battery retainer.
19
H4435pr-0921

BATTERY INSTALLATION

® 6 volt battery with A-style
® Super 6™ volt
Hood
Unlocked
Locked
1 / turn to the
4
Power Wheels
®
6 Volt Battery
Slide Battery
Retainer
3
GAP
Incorrect
• Plug the battery connector into the motor harness connector.
Note: If the battery connector will not plug into the motor harness
connector, turn it over and try again! Do not force the battery
connector into the motor harness connector.
4
• Lower the hood on the vehicle. Using a slotted screwdriver, turn
each lock fastener / turn to the locked
1
4
IMPORTANT! Remember to keep the lock fasteners locked
at all times to prevent children from accessing the battery
compartment.
Motor Harness
Connector
Battery
Connector
NO GAP
Correct
Hood
Unlocked Locked
position.
H4435pr-0921
H
19