Power Wheels H4435 Owner's Manual With Assembly Instructions page 15

24
• Insert a hood latch into each slot in the front end of the vehicle.
1
• Turn each hood latch a / turn to fit in place. Pull up on the hood
4
latches to be sure they are secure.
Dashboard Slots
25
• Insert the tabs on the rear edge of the hood into the slots in the
front of the dashboard.
• Pull the hood forward. Lower the hood closed.
H4435pr-0921
ASSEMBLY
ASSEMBLY
Hood Latches
Slots
Hood Tabs
Lock
Fastener
26
• Using a slotted screwdriver, turn each lock fastener in the hood
1 / turn to the locked position.
4
IMPORTANT! Remember to keep the lock fasteners locked at all times
to prevent children from accessing the vehicle battery compartment.
Brush Guard
27
• Fit the brush guard to the front end of the vehicle.
Hint: Using the end of a Phillips screwdriver, poke a hole in the thin
plastic covering over the lower holes in the brush guard.
• Insert two #10 x 1" screws through the lower holes in the brush
guard and into the front end of the vehicle. Tighten the screws.
Lock
Fastener
Unlocked Locked
F
15