Power Wheels H4435 Owner's Manual With Assembly Instructions page 13

16
• Place the dashboard on the top side of the vehicle, as shown.
• Insert five #10 x 1" screws into the dashboard. Tighten the screws.
Steering Wheel
Large Opening
17
• Position the steering wheel with the large opening UP.
• Position the steering column so that the bend is UP, as shown.
• Fit the steering column through the center hole in the steering wheel.
H4435pr-0921
ASSEMBLY
Dashboard
Large Opening UP
Steering Column
Bend
Upright
.437 Cap Nut
18
• Fit a .437 cap nut on the end of the steering column.
• Tap the cap nut with a hammer to attach the cap nut on the steering
column. Pull on the cap nut to be sure it is secure.
Hints:
- You may need the help of another adult to keep these two parts in
the correct position.
- You may want to position the steering column on a scrap block of
wood to protect the assembly surface.
Steering Wheel Cap
19
• Fit the steering cap into the center of the steering wheel. Be sure to
align the notch in the steering wheel cap with the tab in the center
of the steering wheel.
• Insert two #8 x 1" screws into the steering wheel cap. Tighten
the screws.
End of Steering Column
.437"
Steering Wheel
F
13