Power Wheels H4435 Owner's Manual With Assembly Instructions page 10

F
Vehicle
4
• Slide the rear wheel assembly through a motor and the back end of
the vehicle.
Driver
Teeth
Motor Gearbox
Rear Wheel Assembly
5
• Continue to slide the rear wheel assembly through the back end of
the vehicle and out through the other motor.
Note: Make sure the teeth in the driver fit into the motor gearbox.
10
Motor
Rear Wheel Assembly
Motor
ASSEMBLY
6
• Fit the other driver onto the end of the rear axle. Make sure the teeth
in the driver fit into the motor gearbox.
• Slide a wheel (indented side first) and hubcap (pointed side first)
onto the end of the rear axle. Make sure the ribs on the wheel fit
into the grooves in the driver.
• Fit a .437 cap nut on the end of the rear axle.
• Tap the cap nut with a hammer to secure the cap nut on the rear axle.
Pull on the cap nut to be sure it is secure.
Hint: You may need the help of another adult to support the other end
of the rear axle assembly while you tap the cap nut.
Groove
Front Axle
Short End
7
• Fit short end of the front axles up through the holes in the underside
of the steering linkage. Make sure the long end of each front axle fits
into the groove on each end of the steering linkage.
Rear Wheel
(Indented Side First)
Driver
(Pointed Side First)
Rear Axle
Steering Linkage
Front Axle
Long End
.437 Cap Nut
Hubcap
.437"
Front Axle
Short End
Front Axle
Long End
H4435pr-0921