Display Setup - Denon DVD-A1UDCI Owner's Manual

ENGLI!S H
Set display-related items,
Setting items Setting contents Setting items Setting contents
Screen Saver
Set the screensaver.
Wallpaper
Settodisplaythe background
while playback is stopping.
Still Mode
Set image quality during
pause.
Slide Show Time
Sets the display time of
JPEG files.
Temporary Display
When the display is set to
"Off" by the Dimmer Control
(12ir'
page 49) or Pure Direct
Function (o::1r'page 40). this
sets it to temporarily display
operations received.
Captions
This setting output asubtitles
signal to a closed caption
decoder (sold separately).
Off : Do not use the screensaver.
On : The screensaver function activates when stop or pause status
continues for about three minutes.
fktJ.u:e : Displays the DENON logo.
Black: Set the background to black.
Gray; Set the background to gray.
Blue: Set the background to blue.
Automatic: Display automatically using "Field" or "Frame" per the still
image information.
Field: Set when there is a blurred image when 'Automatic" image display
is set.
Frame; Set to display non moving images in high resolution.
3 - .5 - 100sec : This sets the display time per frame of a JPEG file during
slideshow playback
Off : Do not temporarily display operations.
On : Temporarily display operations.
Off : Do not output the closed caption (subtitle) signal.
On : Output the closed caption (subtitle) signal.
Auto Power Mode
This setting automatically
sets the power to standby.
Power Saving
Set power saving mode
during standby
Remote Control Setting
(Main unit side)
Set the remote control.
BD Data Utility
Erases data on SD Memory
Card. and initializes cards.
Off : Do not use auto power mode.
On : This setting automatically sets the power to standby if any of the
following states continues for approximately 30 minutes.
• Disc not loaded
• Playback has stopped
• Stopped due to resume function
power Saving Standby: This is the lowest power consumption mode.
During standby. operations are not accepted via HDMI control or RS-
232C
Normal Standby : This is the low power consumption mode. During
standby. operations are accepted via RS-232C but not accepted by HD I
control.
HDMI Control Mode: Setting for turning the power on using an external
device's HDMI control function or by operation via RS-232C. SlightlV
higher power consumption.
Quick Start Mode: Start up time is faster but power consumption during
standby is higher.
[Remote ID]
Switches the DVD-A 1UDCl's remote controllD code when other DE NO
BD Players are in the vicinity.
• DENON 1 : Set the switch in the remote control battery compartment to
''1'' as well ("Remote Control Settings (Remote Control Side)" o::1r' page
7).
• DENON 2 : Set the switch in the remote control battery compartment to
"2" as well ("Remote Control Settings (Remote Control Side)" o::1r'page
7).
[Receive Legacy Remocon]
Set whether or not to accept remote control signals of a DENON DVD
player or other device.
• On: Accept
• Off : Do not accept
BD Data Erase ; Erases both internal memory and SO Memory Card
storage.
Initialize SD Card: Initializes the SD card to be used for the Bonus View
function.
-N,na
• Insert or remove a SO Memory Card while the power is in standby
If you insert a SO Memory Card while the power is ON. the SO Memory
Card may not be read.
• The SO card used for the Bonus View function must have a capacitv
of 1GB or greater. Also the SO card must be initialized on the OVD-
A1UOCI.
• This operation will delete all the data. Do not perform this operation
when an SO card containing MP3 or JPEG data is inserted.
I
.J
;;;
Remote control operation
buttons
.Displaying the menu
'Cancel the menu
.Moves the cursor
'(Up/Down/Left/Right)
e
:Decision the setting
RETURN
o
:Return to previous menu
32