Den On Link Connection Cd Making A Jitter-Free Connection" 18 Denon Link Connection Making A Normal Connection; Connection To An Av Amp With No Hdmi Video Input; Playing Back With A Direct Connection To A Tv - Denon DVD-A1UDCI Owner's Manual

ENGLISH
1. Home Theater Playback - Playing Back Using Multi-channel System-
OENON LINK Connection @ Making a Normal Connection
2. Playing Back with a Direct Connection to a TV
Check the television's audio and video terminals and make the connection to one of them.
J
(Sold
separately)
TV
HDMI
IN
HDMI input
terminal
Audio terminals Video terminal S video input
Component video
terminal input terminal
TV TV I-~W-
TV
-AUDIO- -VIDEO- - - V I D E O - -
AUDIO VIDEO $ VIDEO
COMPONENT VIDEO
IN
IN IN
IN
R
L
V P8 PR
~~ ~
@
~~9
M
(supplied)
(Sold
separately)
• When connecting to a DENON LINK-compatible AV Amp, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.
• DENON LINK connection requires that the version of AV Amp to be connected match the DVD-
A 1UDCI version. Check the version of the AV Amp, and then on the GUI Menu, set "DENON LINK
Setup" - "DENON LINK Mode" (!?if'page 30)
If the DVD-A 1UDCI and AV Amp versions do not match, audio cannot be output correctly.
o
AVAmp
- A U O I Q -
DENON LINK
• DENON LINK supports digital transmission up to 24 bit/2 ch at 192/176.4 kHz, and up to 24 bit/6 ch
at 96 kHz or less.
• When you have made a DENON LINK connection, the DVD-A 1UDCI's speaker setting becomes
invalid. (Make the speaker setting on the connected AV Amp)
• DENON LINK 2nd cannot transmit multi/stereo area audio of Super Audio CD.
-N'U-
DENON LINK does not support SD audio transmission.
I
Connection to an AV Amp with No HOMI Video Input
Check the video terminals and make the connection to one of them.
AVAmp
- V I D E O -
VIDEO IN
5 VIDEO IN
o
COMPONENT
V1ilE9'N
V
~'
PeG.
PR~
•
When outputting the DVD-A 1UDCI's analog 2-channel audio to the television's 2-channel (stereo)
audio input terminal, on the GUI menu, select 'Audio Setup" - "7.1ch Audio Out", and set it to "2
Channel" (@"page 27).
'~[.)j.
Do not connect the DVD-A 1UDCI's video output via a VCR (Video Cassette Recorder). Some media
contain copy prohibit signals, which will disturb the screen image.
When playing NTSC disc, DVD-A 1UDCI's video output becomes NTSC signal format.
When playing PAL disc, DVD-A 1UDCI's video output becomes PAL signal format
19