Video Setup - Denon DVD-A1UDCI Owner's Manual

ENGLISH
The Super Audio CO audio siqnal is a 44.1 kHz/16-bit Linear PCM output.
,
~.
I
16'9 Squeeze Auto: Output to a wide screen TV For 4:3 video, display in
the center of the screen without changing the aspect ratio.
WIDE (16:9) : Output to a wide screen TV
4:3 PS : Output to a 4:3 TV For wide video, trim the left and right side of
the image and display in 4:3 aspect ratio.
*
1
4:3 LB : Output to a 4:3 TV Display all of the wide video.
*
2
480/576i. 480/576P, 720P, 1080i,
Source Direct: Output video using its source resolution. Convert the
1080p video source to 1080i.
Setting contents
Aut2 : Detect the type of video material and automatically switch the
mode. Normally, this setting is used.
Video1 : Suitable for playing video material discs.
Video2: Suitable for playing video material discs or 3D-frame film material
discs.
EuIJ :
Set when a home-use monitor is connected.
Normal: This setting is used when video synchronization is disturbed on
a professional-use monitor.
, This is not available for HDMI output.
Video Setup
DefaJ.l1UeningsJuunderlined.
TV Aspect (Aspect ratio)
Set the screen type and
display mode of the TV
Setting items
Component Resolution
Set the component output
resolution.
Progressive Mode
Set an appropriate
progressive conversion
mode for the source video
material.
TV Active Area
Sets the horizontal display
range when the analog
video output resolution is
480i/576i
*
1 : Depending on the video content, even though you set the 4:3 PS (pan Scan), the content may be
output in 4:3 LB (Letter Box).
*
2 : Only valid for content recorded in 480i/576i.
HDMI Setup
Setting contents
~:
Super Audio CO audio is output.
Off : Super Audio CD audio is not output.
[Control]
• Off : Disable the HOMI control function.
• HDMI1 On : Link with the device connected to HOMl1
• HDMI2 On : Link with the device connected to HOMI2.
[Power Off Control]
• On :
Turns the OVD-A 1UOCl's power to standby through linkage to the
TV
• Off: Ooes not turn the OVO-A 1UDCI's power to standby through linkage
to the TV
,
• For the HOMI control function to operate, it is necessary for the OVO-
A1UDCI or HOM I-compatible TV connected to the OVD-A 1UOCI to have
an HOMI connection
• Refer to "HDMI Control Function" (l2if'page 49) for more information
about the HOMI control function.
• The HOMI control function from the connected device becomes valid
when, on the GUI menu, "DENON LINK Setup" - "DENON LINK Mode"
is set to "4th" (l2if'page 30).
• After the "HOMI Control" setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
Setting items
SA-CD Audio Out
Set to output stereo/multi
area audio of Super Audio ,
CO to the HOMI terminal.
HDMI Control
Can operate the unit in
conjunction with an HOMI
control support device.
'N'U-
If you set "DENON LINK Setup" - "OENON LINK Mode" on the GUI menu to "4th", you will no longer
be able to change the "HDMI Control" - "Control" setting. To change the setting, switch "DENON LINK
Mode" to a setting other than "4th" first and then change the setting.
Remote control operation
buttons
SETUP
o
.Displaying the menu
'Cancel the menu
.Moves the cursor
'(Up/Down/Left/Right)
:Decision the setting
RETURN
o
:Return to previous menu
26