Replacing the front
blotter strips
A-61555 March 2007
Downloaded from
www.Manualslib.com
Blotter strips collect ink overflow. They should be replaced when there
is a build-up of ink. Replacement blotter strips may be purchased
through your supplier.
1. Open the pod.
2. Use the green tab to lift and remove the ink blotter strip cover to
access the front blotter strips.
3. Carefully pull the blotter strip(s) off the transport. You can replace
one or both of the strips as necessary..
4. Discard the soiled strip(s)
5. Peel the backing away from the blotter strip.
manuals search engine
Remove Ink Blotter Strip cover
4-9