Switching Between Detail Information Display And Preset List Display; Storing And Recalling Broadcast Frequencies - Pioneer AVIC-D3 Operation Manual

-
~
tuning
P1
6) you can easi Iy store
for later recall
Preset tuning keys (P1 - P6)
Storing and recalling broadcast
frequencies
If you touch any of the
1)-P6
up to six broadcast
with the touch of a key.
or you can
stations. Seek tuning starts
as soon as you release the
4
To perform seek tuning, keep touching
or for about one second and
release.
The tuner will scan the
broadcast enough for
is found.
You can cancel seek tuning by touching either
or
3
To perform manual tuning, touch
or briefly.
The move up or down step by
1
When you find a frequency that you want
to store in memory, keep touching a pre-
set tuning key P1 - P6 until the preset
number (e.g., P.CH 1) stops flashing.
The number you have touched will in the
number indicator and then remain lit.
The selected radio station has been
stored in memory.
o
Up to 18 FM 6 each of the
th ree FM and 6 AM stations can be
stored in memory.
2
The next time you touch the same preset
tuning key P1 - P6, the radio station fre-
quency is recalled from memory.
o
You can also use'" and
~
to recall radio
stations frequencies assigned to preset
tuning
P1 P6.
side of the basic screen
Detail information display
Preset list display
You can switch the
to your
Switching between the detail
information display and the pre-
set list display
1
Touch "Detail" (or "Preset").
Each touch of
"Detail"
(or
"Preset")
the detail information or list dis-
87