Setting The Vehicle Dynamics Display - Pioneer AVIC-D3 Operation Manual

-
z
~
3
Touch the items you want to display.
2
Touch the left or right instrument.
Touch are
Until the sensor's initial is
only the and clock are available.
1
Switch to the Vehicle Dynamics Display.
~
the map mode
-+
35
Setting the Vehicle Dynamics
Display
You can the values
instruments on the and
to
at the center of
stored on the Pio-
you cannot select the
starts changing. After
image
re is
is
V ' r \ r \ r \ r ) r r \ r l
ina
cover the whole screen.
The
a short wh
appears.
D When you select
neer DVD
layout method.
D When the
re starts to do not
turn the vehicle until the mes-
sage appears to indicate that
has finished
the screen.
"Repeat":
8
Touch "Done".
6
Touch a picture you want for the back-
ground.
7
Select how to display the picture.
You can the following items:
"Center":
m
Co
a:
::::s
(Q
You can select the following items.
Voltage:
the power supply and sup-
from the to this
C'\IC','r\Y"Y\
Acceleration:
Displays acceleration in a forward direction.
The indicates acceleration while the
sign indicates deceleration.
Side Acceleration:
acceleration in a side direction, such
as when turning. The
+
indicates a right
turn, while the - indicates a left turn.
Angular Velocity:
the vehicle's turning angle over one
second (how far it has turned in a second).
Slope:
the vehicle's vertical movement. The
+
side represents the ang and the -
side the falling
Direction:
the direction your vehicle is
in.
Clock:
" f ' Y " " r , \ / f '
the current time.
to
is reset, or the
is changed, the back-
ground picture may back to the
nal is also a ity
that the will revert to the original
re for some other If th is
pens, set the nd pictu re
On this screen, you can select the following
items:
"Select another Picture":
This is selected when you want to
another Retu rn to Step 5.
"Change another background":
Select if you want to the
Splash Screen, Audio Operating screen back-
grounds or the backgrounds.
Return to
3.
D When the
67