Installing The Program - Pioneer AVIC-D3 Operation Manual

o
selected here is for
IIrt~'"tln,n functions Destination
only.
:) To the .... 72
Installation of the program begins in the lan-
guage that you chose.
4
Select the language from the list.
Touch the language you want to use.
3
Touch "Yes/Qui".
When you start the for the
first you will see a confirmation message
if you wish to select another
English is the default of the
tion If desi you can select another
as shown.
ish, touch "No/Non". After
n V n { ' U L 1 "
to Step 7.
o
When you want to select another lan-
guage, touch "Yes/Qui", and
to
the next
• Qnce the installation of the program starts,
do not stop the engine of your vehicle nor
switch off the navigation system until the
installation is completed and the following
Audio screen appears.
I
A
CAUTION
I
2
Insert the Pioneer DVD Map Disc into the
disc loading slot of the navigation sys-
tem.
When the program has been found,
installation of the program
o
Do not insert other than a disc
into the disc load slot.
o
If you cannot insert a disc completely or if
an inserted disc is not check
that the label side of the disc is up. Press
the EJECT button to the d and
check the disc for before inserting
the disc again.
1
Park your vehicle in a safe place.
Leave the on, and make sure that the
brake is
The program is installed to the
the ication disc.
This is not necessary if your dealer already
performed the installation.
When installing the program, you carry out the
following When all the proce-
dures are , you can use the navigation
system.
1
Insert the disc while the vehicle is
parked.
.
~
"'C
C
(I)
0.
0.
«
_ Installing the Program
~
.........
~
z
130