Switching The Map Between 2D And 3D; Scrolling The Map To The Position You Want To See; Viewing Information About A Specified Location - Pioneer MZ360500EX Owner's Manual

Navigation av system
Table of Contents

Advertisement

How to use the map
1. Display the map screen.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch anywhere on the map during
navigation.
The map stops following the current position
and control keys appear.
3. Touch
/
to tilt up/down or
rotate left/right.
Touching the key once modifies the view in
large steps and touching and holding the
key modifies it continuously and smoothly.
4. Touch [Back] to move the map back to
follow the current GPS position.

Switching the map between 2D and 3D

1. Display the map screen.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch anywhere on the map during
navigation.
The map stops following the current position
and control keys appear.
3. Touch
or
to switch between 2D and
3D view modes.
Each time you touch the key the setting
changes.
When the 2D map screen is selected,
displayed.
When the 3D map screen is selected,
displayed.
4. Touch [Back] to move the map back to
follow the current GPS position.
Scrolling the map to the position you
want to see
1. Display the map screen.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch and drag the map in the desired
direction to scroll.
/
to
Positioning the cursor to the desired
location results in a brief information
overview about the location being
displayed at the top of the screen, with
street name and other information for this
location being shown.
The scrolling increment depends on your
dragging length.
3. Touch [Back] to move the map back to
follow the current GPS position.
Viewing information about a specified
location
An icon appears at registered places such as
"Favourites" entries and places where there
is a POI icon or traffic information icon. Place
the cursor over the icon to view detailed
information.
1. Scroll the map and move the scroll cursor
to the icon you want to view.
2. Touch
location.
3. Touch the item that you want to check the
detailed information.
 Touch [Back] to return to the map.
For details of the POI icons, refer to
"Customising the map screen settings" on
page 94.
For details of the traffic information icons,
refer to "Setting the traffic information" on
is
page 93.
is
to see the details of the selected
37

Advertisement

Table of Contents
loading

Table of Contents