Route Information - Limitations; Overlay Poi - Limitation; Memory Mode - Limitations; Avoid Area - Limitation - Pioneer AVIC-D3 Operation Manual

o
A set Areas to Avoid may be deleted when _
the is u If this the
z
try to recover the
~
but data can be recov-
~
ered only areas stored on the disc.
items that could not be a recovery
process will when you set another disc.
• If a route calculation is within an
areas not stored on the the route m
not be set from the streets you are cu
driving. if you set the destination in an
area not on disc of sys-
tem may not be able to set the route up to the
desti nation.
• If the veh icle deviates from the set route in an
area not stored on the the Auto Reroute
function will not work.
• Even if "Close-up of Junction" is "On", the
d will not switch to an en map of
the junction.
• Even if you drive on the
tion, exit numbers and
will not be
Route information
»
"C
"C
t'D
::::J
Q.
x·
Other function limitations
• If the set route goes through an area not stored
on the no route Ie for that area will be
(If the set route traverses both an
area not stored on the disc and area stored on
the only the route Ie within the area
stored on the disc wi II be
• Route scrolling for an area not stored on the
disc is only with a map scale of 0.5 mi
or above.
Overlay POI
• Only display "City Center" is available in an
area not stored on the disc.
Memory mode
• Only data for areas stored on the disc can be
memorized. for areas not stored on the
disc cannot be
YY\r'YY\''' .... -yr.rl
• If the vehicle enters an area not stored on the
for memory navi mode will
have to be redone after the vehicle returns to
an area stored in the disc. for the
memory navi mode starts from the location
where the vehicle re-entered the area stored on
the d
Avoid area
• An area not stored on the disc cannot be set as
an Areas to Avoid.
141