Pioneer AVIC-D3 Operation Manual page 150

Message When What to do
-
~
~
z
Route calculation was not possible.
was
because the destination is too far.
Route calculation has failed because
of a malfunction of map data, soft-
ware. hardware or disc.
• Change the destination.
• Clean the disc.
• Consult the Pioneer Local dealer if
this
rnocc~,no
a way
outside the CTR if you know where
the restricted area is.
• Try a destination or way point(s)
away from the set
to some extent.
• Drive your vehicle to an unre-
stricted area and reset the destina-
tion and point(s).
by following the instructions shown
on the
Or, proceed to the next without
nn1".nVtY"\n
the house number and
the or street first.
the city, the result is saved as
a The data of the
cnc,,,,t,or!
city, however, may not be hit by the
different search criteria. In this case,
another or
the destination.
a destination or way that do
not pass through toll roads (includ-
toll areas).
a destination or way point(s) that do
not pass through toll roads (includ-
toll areas) and
Areas to Avoid.
a destination or way that do
not pass through the
Areas to
Avoid .
orway
point(s) cannot be established by
h\lr~::>CClrln toll roads (including toll
not used (for the his-
tory data of the city that was used
In
the POI Search cannot be found in
the
Address Search.)
or way
point(s) cannot be established by
toll roads (including toll
Areas to Avoid.
way or
are in an area where no
road exists a mountain) and the
route calculation is
fied area.
Toll road has not been avoided.
was
because no can be pro-
vided around the destination or the
.
~
"C
C
G>
0.
0.
<C
148