Setting The Vehicle Dynamics Display - Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual

Chapter
09 Using XM Tuner and Other Information
Setting the Vehicle Dynamics
Display
You can change the contents of the meters on
the left and right of the Vehicle Dynamics Dis-
play.
Until the sensor's initial learning is complete,
only the voltage and clock are available.
p The speed displayed is a guideline and may
not correspond to the actual speed.
1 Switch to Vehicle Dynamics Display.
= For more details about "Changing the map
display mode", refer to Switching the view
mode on page 38
2 Touch the left or right meter.
Touch panel keys are displayed.
3 Touch the items you want to display.
You can select the following items:
[Voltage]:
Displays the power supply and voltage sup-
plied from the battery to this system.
[Acceleration]:
Acceleration in a forward direction is dis-
played. The + sign indicates acceleration while
the - sign indicates deceleration.
[Side Acceleration]:
Acceleration in a side direction such as when
turning, is displayed. The + sign indicates a
right turn, while the - sign indicates a left turn.
[Angular Velocity]:
Displays the vehicle's turning angle over one
second (how far it has turned in a second).
[Slope]:
Displays the vehicle's vertical movement. +
side represents the rising angle, and - side the
falling angle.
[Direction]:
76
En
Displays the direction your vehicle is traveling
in.
[Clock]:
Current time is displayed.
[Adjust Look]:
Touch [Adjust Look] to display a screen for se-
lecting the panel pattern. Touch one of the pat-
terns from among those displayed on screen
to change the panel to the selected pattern.
p If you touch [Peak Hold Reset], the maxi-
mum and minimum (green line) values indi-
cated in [Acceleration] and [Side
Acceleration] are reset.
p You cannot change the speedometer at the
center.
p Selecting Demo Mode in the Settings
menu enables you to perform a demonstra-
tion with random values.