Table of Contents
Advertisement
•
Press WAIT or TRANSFER.
•
Remain off-hook until the person dials 56 from any phone.
•
The paged person will be automatically connected with you.
CALL PARK AND PAGE
When you have an outside call for someone who is not at his/her desk, you can
park the call prior to paging.The iDCS 100 Release 2 and the iDCS 500 Release sys-
tems offer two different methods:
MANUAL PARK ORBITS
•
While in conversation, press the PARK button.
•
Entered a desired orbit number (0-9), if the orbit number is busy dial another
orbit number. Display users can press
available orbit number and see the number in the display.
•
Remember the selected orbit number.
•
Replace the handset when finished.
•
Lift the handset and make a page announcement as previously described
(example:"John Smith park two").
To retrieve a parked call from orbit:
•
Press the PARK button and dial the announced orbit number (0-9).
•
You will be connected to the parked call.
NOTES:
1.
You must have a PARK button or park access code to retrieve and place calls
in park orbits.
2.
If the parked call is not retrieved within a pre-programmed period of time, it
will recall your keyset and have a slow flashing amber light. You cannot park
and page intercom calls.
3.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
AUTOMATIC PARK WITH PAGE BUTTON
•
While in conversation, press the PAGE button.The call is automatically parked
at your station.
•
Receive page tone and dial a desired page zone number.
•
Make announcement indicating your extension number or the line number.
Hang up.
To retrieve an automatically parked call:
•
Dial 10 plus the number that was announced. If you have a PAGPK button,
press it and dial the number that was announced. If you have a PARK button,
press it and dial the announced orbit number.
to automatically place the call in any
37
•
You will be connected to the parked call.
NOTES:
1.
If the call is not retrieved within a pre-programmed period of time, it will recall
your keyset and have a slow flashing amber light. You cannot park and page
intercom calls.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you receive a busy
signal, you can leave a message indication:
•
Press the MESSAGE button—OR—dial 43 and receive confirmation tone.
Hang up.
•
The message button on the Main Programmable Button screen and the TSI
will flash at the called station.
NOTES:
1.
A station can have up to five message indications.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
CANCELING MESSAGES
To cancel a message indication that you left at another station, dial 42 plus the
extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42 plus your extension.
Your MESSAGE button indicator will stop flashing and the TSI will go out.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
RETURNING MESSAGES
•
Press the MESSAGE button or dial 43. The first station that left a message will
be called automatically. If that station does not answer, your MESSAGE button
indicator will continue to flash and the TSI will stay on.
•
Repeat until all messages have been returned in the order received.
•
Your MESSAGE button indicator will stop flashing and the TSI will turn off
when all messages have been returned.
NOTES:
1.
Display keyset users can view message indications and return them in any
order. See Viewing Message Indications under Display Features.
38
Advertisement
Table of Contents
