Table of Contents
Advertisement
SCROLL BUTTON ASSEMBLY
The scroll button is actually a type of thumbwheel assembly. You may use it to
scroll through the station screens. Rolling the SCROLL BUTTON DOWN (towards
the navigation button) will advance you through the multiple STATION FIXED
FEATURE and STATION PROGRAMMABLE button screens. Rolling the SCROLL
BUTTON UP (towards the station display) will bring the cursor back towards the
Main Screen. By scrolling up or down, you cause the cursor to move back and forth
through the screens in the same manner as the UP/DOWN arrows on the top
SELECT BUTTONS work.
NAVIGATION BUTTON
The 5012L keysets incorporate a Navigation Button. This button is designed to
assist the user in activating and using various station features, more easily. These
features include Outgoing Call Log, Incoming Call Log, Speed Number Search, Call
Forward Assign and Alarm Assign.
With the NAVIGATION BUTTON, the station user is no longer required to enter
station level programming to activate these frequently used features. A few but-
ton presses and these features are activated.
The NAVIGATION BUTTON is divided into separate feature buttons. These but-
tons are described below.
•
MENU BUTTON: This button displays the station feature main menu, which is
configured in icons, so that the users can easily utilize various settings and
helpful functions.
•
SEND BUTTON: If the station is programmed for Enblock Dial Mode, when
dialing an outside telephone number or internal station number, you must
press the SEND button to initiate the call. This button is also used when
reviewing recently received or called numbers and answering incoming calls.
When reviewing recently received calls, continue to press the SEND button for
more than 2 seconds and the last outside number called will be redialed.
The SEND button operates as the ANS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
•
ENTER BUTTON: This button is used to select a menu option, or to save
changes made to a menu or submenu option.
•
DIRECTION BUTTON: The DIRECTION BUTTON is the donut shaped ring,
which surrounds the ENTER button.This button is used to navigate within the
menus. There are directional arrows stenciled into this button, which indicate
which direction the cursor will be moved.
Note that the DIRECTION BUTTON has four icons, at the top, bottom, left and
right of the ENTER button. These icons are used to navigate directly to
particular programming options from the CALENDAR screen.
Pressing the top (HOME) icon will take you directly to the Main Menu. The
bottom (TONE) icon will take you to the Ring Tone/Volume Menu.The left side
(MESSAGE) icon will take you to the Text Message Menu. The right side
(PHONE) icon will take you to the PhoneBook Menu.
•
END BUTTON: This button is used to disconnect a call after a conversation or
to move to the initial screen.
The END button operates as the RLS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
•
CANCEL BUTTON: This button is used to erase any characters or numbers
entered by the dial button or to move to the previous screen.
After pressing the MENU button, use the direction button to highlight the desired
menu icon. For multiple screen options, the UP/DOWN arrows at the either side of
the top of the LCD may be used to scroll on a per page basis. Press ENTER to
access that menu. To navigate within the menu, you may scroll to the desired
option/function, dial the associated option function number or press the associ-
ated select button on either side of the display.
Press the END button to exit programming.
FEATURE ACCESS CODES
This user guide is written based on the default access code for using system fea-
tures. If the system numbering plan has been changed some of the access codes
may not be correct. Your installing company can inform you the correct codes.
5
6
Advertisement
Table of Contents
