Canceling Callback; Intercom Calls; Calling Other Stations; Dialing The Most Recent Outgoing / Incoming Number - Samsung iDCS Release 2/OfficeServ User Manual

CANCELING CALLBACK

A callback will be canceled if not answered within 30 seconds. If you have set a
callback, the cursor associated with the CALLBACK button, will be solid black.
To cancel a callback:
• Press the CALLBACK button, if programmed, or dial 44. The display will show
the callback details and an option to CLEAR the callback.
• Press the CLEAR button, or press the HOLD button.This will cancel the last set
callback and display the next set callback, also with the option to CLEAR.This
process is repeated until all callbacks are cleared from memory.
NOTE: If the Hot Keypad feature is turned off, you must first lift the handset or
press the SPEAKER button before dialing.

CALLING OTHER STATIONS

• Dial the extension number or group number.
• Wait for the party to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.
• Finish the call by replacing the handset or pressing the ANS/RLS button or
END button.
NOTES:
1. If you have a DSS button assigned to an extension or station group, you may
press this button instead of dialing the number.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
DIALING THE MOST RECENT OUTGOING /
INCOMING NUMBER
• Press the SEND button.The most recent call (Internal or External to system) to
or from the station will be displayed.
• Continue to press the SEND button and the system will automatically dial the
number for you.
ANSWERING INTERCOM CALLS
• When your keyset rings, simply lift the handset—OR—press the ANS/RLS or
SEND button to be connected to the calling station.
• Finished the call by replacing the handset or pressing the ANS/RLS or END
button.
See Ringing Preference under Customizing Your Keyset.
VOICE ANNOUNCE MODE
When another station calls you, your keyset will sound a brief attention tone and
you will hear the caller's announcement.
• Press the ANS/RLS or SEND button to turn on the microphone and speak
handsfree—OR—lift the handset to reply.
• To finish the call, replace the handset or press the ANS/RLS or END button.
NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.
19 20

INTERCOM CALLS