Holding A Call; Call Park; Voice Mail; Call Transfer - Samsung WIP-500M User Manual

Officeserv wireless
Table of Contents

Advertisement

Camp On
If an internal call cannot be connected, you can make the other party's phone to
play an urgent sound and wait for the other party to answer your call.
The urgent sound cannot be heard while the other party is busy. The bell starts to
ring when the other party hangs up the call.
If you made a call but the call is not connected, press [MENU] button.
1.
2.
Press the
button and move to [3: Camp On].
Press the [OK] button.
3.

Voice Mail

If the
icon shows up in the handset display, there is either a voice mail mes-
sage or a station message for the station. To check and access the messages:
1.
Press the
button.
2.
Press [1] to access the station messages.
Press [2] to connect to the Voice Mail System.
3.

Call Transfer

This is used to transfer a call to a designated phone number during a phone con-
versation.
Press the [Transfer] button during a phone conversation.
1.
2.
Enter the phone number to be transfer, and then press the
While in transfer status, press the [Transfer] button again to recon-
nect to the original caller.
22

Holding a Call

This is used to hold a call for a while during a phone conversation.
Press the [Hold] button during a phone conversation.
1.
Press the [Hold] button again to resume your conversation.
2.
Mute on a Call
This is used to block your voice from your phone during a call. But you can still hear
the other party.
1.
Press the [C/MUTE] button during a phone conversation.
Press the [C/MUTE] button again to resume your voice.
2.

Call Park

While on an outside call conversation, you can park this call and let others pickup
the call.
Automatic Park with Paging Function
1.
Press the [MENU] button during an outside phone conversation.
Press the [1] button and enter the page zone.
2.
3.
Press the
Manual Park Orbits
Press the [TRSF] button, feature code, and orbit number, while on an outside
1.
conversation.
Pick Up a Parked Call
1.
Press the feature code (e.g. 10),
Pick Up a Held Call
1.
Press the feature code (e.g. 12),

Auto Answer

button.
1.
Turn Auto Answer On or Off by pressing [MENU], [HOLD], [ ], [#], [8].

Missed Calls

1.
Press [OK] to display missed call information.
Home Page
Table of Contents
button after paging to park call.
button and the extension number.
button and the extension number.
WIP-5000M Guide
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officeserv wip-5000m

Table of Contents